Deflectrols are designed to fit on the back of a grille or
diffuser and protrude into the main duct in order to
assist the flow of air from the main duct through the
grille or diffuser where a sufficient length of stub duct
is not possible.
Code 0155. Deflectrol.
50 mm increments on the nominal length from 100mm to 600mm and 100 mm to 450mm on the height.
Manufactured in aluminium with welded corners.
The deflectrol would normally be fixed to the grille
or diffuser at one end with the adjustment strap at the other end loose for on site adjustment and then
securing by the customer.
The deflectrol is normally packaged with the grille or diffuser.
The deflectrol can be raised or lowered, within the
recommended distances, at the loose end and then fixed in the desired position in order to give some adjustment to the air volume.
• The code for the basic panel should have 13 digits.
See page 1.
• Please always give the length first and then the height.
A deflectrol to fit a 300mm x 200mm nominal size grille would be coded - 0155/00300/0200.